SURFACE SUPPLIED MOD-1 MASK
SURFACE SUPPLIED MOD-1 MASK: The Surface Supplied MOD-1 is designed for the dive team requiring a lightweight and durable commercial diving mask. An advanced MOD-1 mask model with specialized passages that allow venting the upper eye cavity is paired with a very comfortable extra stretchy 7 mm attached hood.
SINAPSI NOSE FOR SUEX DPV
Sinapsi Nose forSuex DPV: SINAPSI is a special nose for navigation that replaces the standard nose. It is equipped with sophisticated electronics to receive and process underwater navigation data acquired via DPV. The SINAPSI project has required years of increasingly sophisticated research, including many tests and trials to optimise the system using the most exciting, up-to-date technological solutions.
AD300 OXYGEN MONITORING
MASK SPARES KIT FOR KMB 18/28 B P/N 525-315.
KM Part 525-315.
Mask Spares Kit for KMB 18/28 Band Masks with 455 Balanced Regulator
ERON D-1 FOR SUEX DPV
Suex Eron D-1 Dshaboard for Suex Scooter DPV: Dashboard for monitoring and navigation for Suex DPV. Wireless DPV data reception. Can be mounted on DPV holder or worn on the wrist. One-touch function activation. Remaining autonomy in minutes at set speed. DPV battery state of charge. Instantaneous consumption. Water speed (available with Sinapsi nose). Distance travelled in water (available with Sinapsi nose)
3 L STEEL OXYGEN CYLINDER W/ VALVE
3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO
MD300 OXYGEN MONITOR
SUPERLITE® 27® HELMET SPARES KIT P/N 525-321
KM Part 525-321
SuperLite® 27® Helmet Spares Kit with 455 Balanced Regulator
3 L STEEL DILUENT CYLINDER W/ VALVE
3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO
R17 SENSOR FOR VN202 OXYGEN ANALYZER
SL 17K & KM 37 HELMET SPARES KIT P/N 525-350
KM Part 525-350
SL 17K & KM 37 Helmet Spares Kit with 455 Balanced Regulator
2 L STEEL OXYGEN CYLINDER W/ VALVE
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap
2 L STEEL OXYGEN CYLINDER W/ M26 VALVE
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap
R22 VAN OXYGEN SENSOR FOR DIVESOFT
2 L STEEL DILUENT CYLINDER W/ VALVE
2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap
R22AT OXYGEN SENSOR FOR ATA
R22 DEM OXYGEN SENSOR FOR ANALOX OE II (OLD)
1.5 L ALUMINIUM ARGON CYLINDER
1.0 L ALUMINIUM ARGON CYLINDER
R33 D1 SENSOR FOR ANALOX/MIXCHEK ANALYZERS
SEIKA GPS SYSTEM FOR SUEX DPV
Suex brought the GPS signal underwater in wireless mode - SEIKA transmits the position to all ERON D-1s in the water. SEIKA uses an embedded GNSS (Global Navigation Satellite System) receiver within an SMB (Surface Marker Buoy) to capture precise diver position and communicate wireless that position to the Suex Eron D-1 dashboard.